|
Equipment Power
The
Surge Control line of AC and DC power protection modules are designed
to protect measurement and control equipment, computers, motor controllers,
and other sensitive instrumentation. “OEM” and System Integrators
benefit highly from the protection and filtering provided by these
surge suppressors. These models are designed to protect equipment from
lightning damage, surges and spikes in the most severe industrial environments.
Features:
- 120VAC and 220VAC protection
- Effective EMI/RFI filtering in certain models
- Various wiring methods and operating currents
- Sub nanosecond response times
Click On The Links Below For Product Data Sheet
 |
SDP Series -
DIN-Rail mount suppressor/filter, 120 or 220 VAC @ 5, 10, or 15
Amps.
Primary and backup protection both
offer LED indication;
balanced EMI/RFI filtering, narrow (0.80") aluminum enclosure
with foot grounded to DIN-Rail. Additional ground post provided.
Uses: AC Power
|
| |
|
 |
SPU-120 -
DIN-Rail mounted 120VAC @ 10Amps suppressor with EMI/RFI filtering.
Small (0.8" width) size coupled with powerful protection
and long life design. Especially useful when a number of instruments
or control devices need protection. Often used with Surge Control’s
SPU-420 data line models.
Uses: AC Power
|
| |
|
 |
DINT Series -: DIN-Rail mounted 120 VAC, Shunt or Series (10 Amps), 20KAmps Surge Current , heavy-duty surge suppressor / EMI & RFI filter. Includes LED indication of protection status and thermal cutout protection. Ideal for protecting electronic equipment and instrumentation such as, PLCs, RTDs, sliding doors controls, data loggers, water and waste water equipment, etc.
Uses: AC Power
|
| |
|
 |
SPP-1200 Series -
120VAC high performance suppressors, UL, cUL recognized. SPP-1201
(5Amp,
2"x2", Barrier Terminals);
SPP-1202 (15Amp, 2"x3", Barrier Terminals); SPP-1203 (30Amp,
3"x3", Post);
SPP-1204 (5Amp, 2"x2", Post); SPP-1205 (15Amp, 2"x3",
Post). EMI/RFI filtering, "No wear out" design.
Uses: AC Power
|
| |
|
 |
SPP-1206 & SPP-1207 -
120VAC balanced filters with suppression, UL, cUL recognized. SPP-1206
(5Amp, 2"x2", 5 Post); SPP-1207
(25Amp, 3"x3", 5 Post); brings equipment into conducted
emissions compliance (CE, EU, EMC, IEC 801, 1000 etc.) EMI/RFI filtering. "No
wear out" design.
Uses: AC Power
|
| |
|
 |
PIP-120P -
PIP Series - AC or DC powerline transient suppressor. All silicon
device
provides powerful transient absorption of up to
15,000 watts. Protects power supplies, communications equipment,
PABX, CATV distribution and computer systems. PIP (solder terminals)
available in voltages from 30V to 250V, PIP-120P (120VAC with wires).
Uses:
AC/DC Power
|
| |
|
 |
PIPT-120 Series - 120 VAC Shunt, 20KAmps, heavy duty surge suppressor / EMI & RFI filter. Includes LED indication of protection status and thermal cutout protection. Ideal for protecting electronic equipment and instrumentation such as sliding doors controls, data loggers, water and waste water equipment, etc. |
| |
|
 |
SPW-120 & SPW-120H -
120VAC @ 15Amp "in the wall" (flush
mount) Heavy Duty Protection. Mounts in existing wall outlet housing.
SPW-120H high abuse, hospital grade version is also available in
20Amp service. Effective EMI/RFI filtering. Hot, neutral and ground
are all protected.
Uses: AC Power
|
| |
|
 |
SPL-120 & SPL-T120
Series - 120VAC @ 15Amp Medium Duty. Durable plastic case. SPL-120L
(left side outlet); SPL-120R
(right side outlet);
SPL-T120L (adds telco/modem); SPL-T120R (adds telco/modem) LED suppression
indication. Side plug-in allows furniture/equipment to remain close
to the wall.
Uses: AC Power, Telephone, Telecom
|
| |
|
 |
SPP-2200 Series -
220VAC high performance suppressors, UL, cUL recognized. SPP-2201
(10Amp,
2"x3", Barrier Terminals0;
SPP-2202 (20Amp, 3"x3", Post); SPP-2203 (30Amp, 3"x3",
Post); SPP-2204 (10Amp, 2"x3", Post); SPP-2204 (10Amp,
2"x3", Post); SPP-2204A (5Amp, 2"x2", Post).
EMI/RFI filtering, "No wear out" design.
Uses: AC Power
|
| |
|
 |
SPP-2200 Filter
Series - 220VAC balanced filters with suppression, UL, cUL,
recognized. SPP-2204B (15Aamp, 2"x3", 5 post);
SPP-2205 (25Amp, 3"x3", 5 Post): SPP-2205A (high performance
filter); SPP-2205B (Ultra High Performance Filter); SPP-2206 (5Amp,
2"x2", 5 Post). Brings equip. into conducted emissions
compliance (CE, EU, EMC, IEC 801, 1000). "No wear out" design.
Uses:
AC Power
|
| |
|
|
SPP-1202S Series -
DC power lines/BUSS protector. Bi-directional design suited for
DC (0 – 50 volts) or AC (0 – 36 volts)
applications. Automatic reset. "No wear out" design. EMI/RFI
filtering. Performance exceeds ANSI/IEEE C62.41-1991 categories A3
and B3, and UL 1449.
Uses: AC/DC Power
|
|
