Brass Board Stiffeners

Brass Board Stiffeners

Specifications

Material:	Brass per QQ-B-613, half hard.
Finish:	Bright Tin plated per MIL-T-10727, Type 1, .000100" (2.54um) minimum.
Available Grids:	.250" (6.35mm), .500" (12.70mm), .700" (17.78mm), .750" (19.05mm), 1.000" (25.40mm), 1.250" (31.75mm), 1.400" (35.56mm), 1.500" (38.1mm).

Part Number	Dimensions
Part Number	A	B	C	E	F	K	M	N
B 6253	.34 (8.64)	.045 (1.14)	.29 (7.36)	.078 (1.98)	.045 (1.14)	.135 (3.43)	.29 (7.36)	.12 (3.04)
B 6254	.32 (8.13)	.020 (0.50)	.27 (6.86)	.085 (2.16)	.020 (0.50)	.175 (4.44)	.27 (6.86)	.12 (3.04)

tolerances: .xxx + .010" (0.25mm), .xx + .030" (0.76mm)

HOW TO ORDER

The brass board stiffener is available in any length, any number of pins and a broad selection of grid patterns. Construct a part number to meet your requirements or submit a drawing or a sketch.

B6253	-	500	-	6		T
Basic Part Number		Grid		Number of Pins		Finish (Tin)