Standard Tolerances

This table lists CCI's standard tolerances. If tighter tolerances are required, please contact us.

Table 7 - Standard Tolerances

Dimension	Standard Tolerance
Maximum length	96"
Maximum width	30"
Minimum single conductor bend radius	Equals conductor thickness
Mounting hole location	+ 0.020"
Mounting hole diameter	+ 0.010"
Mounting hole to conductor edge	+ 0.030"
Tab to tab, single conductor	+ 0.010"
Tab to tab, multiple conductors	+ 0.030"
Tab hole diameter	+ 0.005"
Tab hole to tab edge	+ 0.010"
Formed angles	+ 2°
Overall length, width	+ 0.030"